Summer Starts Here - Save up to 70%
WeatherTech Side Window Air Deflectors Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado Regular Cab, we'll be installing the weather tech side window air deflectors with dark tenting for the front. Part number WT80426. They're also available in light tenting. Part number WT70426. These tented air deflectors add a stylish look to your vehicle. It boasts a low profile look. It allows interior heat to escape and promotes better air circulation. more
8/24/2016 4:37:47 PM
WeatherTech Front and Rear Air Deflectors Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado, we'll be installing the Weather Tech Side Window Air Deflectors for both the front and rear doors on our crew cab pickup part number WT84426. Here is what they look on the driver side installed. Now we'll move over to the passenger side and show you how to install it. To begin our install, we'll start on the passenger side with the windows down. Starting here with our front window deflector, we'll put the bottom corner in first, we are putting inside the window channel sliding it into place. Now once we've get about half way up the door, I'm going to move to the back corner, flex the wind deflector and slide the back corner into the window channel and then slide it up into place, slide it up into position and lock it in place. more
12/8/2014 9:34:57 AM
Putco Element In-Channel Air Deflectors Installation - 2005 Chevrolet Silverado- Video
Today on our 2005 Chevy Silverado, we'll be installing the Putco air deflectors for both the front and rear doors, part number P580011. To begin our install, we'll first want to clean or prepare the surface where we'll be adhering the Putco air deflectors. This will be inside the window track on the outside edge. To clean it, we're just going to use some rubbing alcoholand a cloth. Keep in mind the older the vehicle is, the more dirt and debris it's going to pick up, so we'llwant to make sure that it's thoroughly cleaned so that our air deflectors will adhere to the vehicle. Now that we've got the tracks cleaned out, let's go ahead and start installing them. Starting on the driver's front, we'll go ahead and remove the backing to the two way adhesive. Onceremoved, we'll take the front edge and feed it into the window track, going up the door frame, then as we get near the front corner, we'll pull the back edge into the window track, and feed them both up to the top of the window track at the same time.Then we'll pull them out to help the adhesiveadhere to the window track. Now once it's fully in position, we'll go ahead and operate the window multiple times, and then leave it up to make sure that the two way tape has a good opportunity to adhere to the window tracking. Now with our driver's front done, we'll go ahead and do the driver's rear. more
9/3/2013 2:10:04 PM
Putco Window Visor Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevy Silverado were going to install the Putco element in channel window visor part #: p580056. This set comes with 4 window visors, one for each door. Well start here with the drivers front. The drivers front visor will mostly sit inside the window channel starting from the rear working your way forward and then its getting front flange thats going to go in between the outside weather stripping and the mirror, will sit just like this once its installed. Now lets go ahead and pull it back out, well remove the side of the 2 way adhesive and go ahead and put it in place permanently. Again, well be putting a 2 way adhesive up into the window channel, as we work our way forward well get the flange started in between the outside weather stripping and the mirror. more
3/13/2012 9:52:47 AM
Filter Videos
Filter Videos
